Some electrical work gets planned. A kitchen renovation needs new circuits run before the cabinets go in. A garage conversion needs a subpanel. An EV charger needs a 240-volt circuit added before the car arrives. Those jobs get scoped on the phone, scheduled at a time that works, and carried out without disrupting the rest of the property. Other calls come in the same morning something stops working, and those get handled the same way: a phone call first, a clear answer on what the job involves, and a visit scheduled as soon as the calendar allows.
We handle electrical work throughout Boyes Hot Springs and the surrounding parts of Sonoma County, from routine outlet repairs to full panel replacements and whole-home rewiring. Whether you own an older home, manage a rental, or run a small business, the process is the same.
Call (530) 298-9565, describe what you are seeing, and we will tell you what it likely means and what happens next. We are available every day from 7:00 AM to 8:30 PM.
The outlet that has never worked since you moved in. The switch that makes a faint pop when you flip it. The porch light that has been on the list for two years. These are the jobs that keep getting pushed back because they seem minor, and they are exactly the ones worth calling about sooner rather than later.
A switch that sparks on contact is not just an annoyance. It points to a loose connection or a failing device, and either one can become a fire hazard inside the wall where it is not visible. A dead outlet that has never worked may be a tripped GFCI upstream, which is a ten-minute fix, or it may be an open circuit that has been sitting that way long enough to cause damage at the connection point. An outdoor light that has not been replaced is often running on wiring that was not rated for weathering in the first place.
Electrical problems don't wait, and neither do we, so the first call is where the diagnosis starts. Describe what you are seeing and you get a straight answer on what it likely means, not a visit scheduled before anyone knows what the job involves.
When you call, the job gets scoped on the phone before anything is booked. You describe the symptom, we ask the questions that help us understand what the work involves, and you get a price before the visit is confirmed. That price covers what the job is expected to require. If something changes once the wall is opened or the panel is pulled, you are told before the work continues.
For planned projects, scheduling is straightforward. We confirm the visit, explain what access is needed, and tell you whether the power will need to come off for any part of the work. For rental properties, that conversation includes whoever is on site, so a tenant is not caught off guard.
Some calls cannot wait for a scheduled slot. A burning smell from an outlet, a breaker that will not hold a reset, or a sparking panel are reasons to stop using that circuit and call now. We take short-notice work, and availability is open every day from 7:00 AM to 8:30 PM. Ask what the schedule allows when you call.
For businesses that have to stay open and properties with tenants in place, we work around the occupancy. That means knowing which circuits need to come off and planning the outage window before the visit, not on arrival.
Boyes Hot Springs has a mix of housing that shapes what comes up most often here. Older homes on original wiring, properties that have had additions and circuits added over the years without full documentation, and newer construction that needs dedicated circuits for modern loads. The jobs below reflect what that mix produces.
A smart switch or dimmer swap is a small job with a real payoff, but the wiring behind the box matters. Older homes sometimes lack a neutral wire at the switch location, which rules out certain devices or requires a workaround. We check what is in the wall before recommending a product, so the switch you buy actually works with what you have.
Properties in this area sometimes include a well pump, irrigation controls, or outbuilding circuits that were added at different times by different hands. These need a dedicated circuit sized to the actual load, with proper grounding and protection at the panel. We handle the circuit from the panel out, and we make sure the breaker and wire gauge match what the equipment draws.
Older homes in Sonoma County still carry knob-and-tube wiring in some cases, and aluminum branch circuit wiring shows up in properties built during certain decades. Both require specific remediation. Knob-and-tube has no ground conductor and cannot be safely buried under insulation. Aluminum wiring at the device connections needs either replacement or proper termination with rated connectors. A partial rewire addresses specific circuits or rooms. A full whole-home rewiring replaces everything from the panel out. The scope depends on what is in place, and that gets assessed before any work is quoted.
A refrigerator, washer, dryer, dishwasher, or range sharing a circuit with other loads is a tripping breaker waiting to happen. Dedicated circuits are sized to the appliance, run from the panel, and protected by a breaker matched to the wire gauge. When a new heating or cooling unit is going in, we handle the dedicated circuit, the disconnect, and the panel capacity needed to carry the load on the electrical side.
Low-voltage work covers doorbell wiring, structured data cabling for home networks, and rough-in for security and audio systems. These jobs often come up during a renovation when walls are open, and they are worth handling at the same time as the electrical rough-in rather than as a separate visit after drywall is back up.
The price is confirmed on the call, before the visit is scheduled. What moves a quote is what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being requested. A straightforward outlet replacement has a different scope than a circuit that needs to be traced back to the panel because the wiring is not where it should be.
Load calculations affect panel and circuit quotes specifically. Adding an EV charger circuit, a subpanel for a detached structure, or a dedicated circuit for a large appliance all start with a check of what the existing service can carry. If the panel needs room before the new circuit can be added, that gets scoped and priced as part of the same call.
There is no charge quoted here because the right number depends on what the job actually involves. A price agreed before every visit. Clear scheduling every visit. Code-compliant every visit.
Call (530) 298-9565 and ask what the work you need runs.
Work done without a permit, circuits added by a previous owner, or repairs that were handled by someone who was not an electrician are common in older properties. The first step is understanding what is actually in place. That means tracing circuits, checking connections, and identifying where the work departs from current standards.
Some of it is correctable without a full rewire. A connection made with the wrong materials, a junction box buried in a wall without a cover, or a circuit that was extended without accounting for the load can all be addressed at the specific location. Other situations require more. Wiring that is deteriorated, improperly gauged, or missing a ground conductor throughout a section of the house is not a spot repair.
We tell you what we find, explain what the options are, and give you a plain answer on repair versus replacement before any work is approved. The work area left as it was found is a standard part of how every job closes out.
A panel replacement or service upgrade requires the power to come off for the duration of that work. There is no way around it. For a business or a household where someone is working from home, that window gets confirmed before the visit so it can be planned around. We tell you how long the outage is expected to run when we scope the job, not when we arrive.
Most circuit and outlet work only requires the specific circuit to be de-energized. A kitchen outlet replacement, a new lighting circuit, or a switch replacement can be done with one breaker off while the rest of the property stays live. Recessed and LED lighting installation, exterior lighting circuits, and EV charger circuit runs typically fall into this category unless the panel itself needs to be opened.
For rental properties and commercial spaces, the outage window is part of the scheduling conversation. We confirm which circuits are affected, how long the work is expected to take, and what access is needed before the visit is booked. You know who to call if you ever need us again, and that means the next job starts with the same conversation, not a new one.
We cover Boyes Hot Springs and the neighboring communities throughout this part of Sonoma County. That includes Fetters Hot Springs-Agua Caliente, El Verano, Eldridge, Sonoma, and Temelec. If your address is nearby and you are not sure whether it falls within the service area, call and ask. Most calls from this part of the county are covered.
Work is available every day from 7:00 AM to 8:30 PM. The same hours apply whether you are calling about an urgent problem or a job you want to plan out over the next few weeks. Anyone sizing up a job in Boyes Hot Springs may want to read our full list of electrical services first.
The existing panel is the starting point. We calculate the load the addition will add and confirm whether the current service can carry it. If it can, we run the circuits needed for the new space from the panel. If it cannot, a service upgrade is scoped as part of the same job.
We keep records of the work scoped and completed on each job. If you need documentation for an insurer, a landlord, or a future buyer, ask when you call and we will confirm what we can provide.
Older properties in this area frequently turn up knob-and-tube wiring, circuits that have been extended without proper documentation, and panels that were adequate for the original load but not for what the home draws now. Grounding is often absent or incomplete on older branch circuits. When we assess a property, we look at the wiring type, the panel condition, and whether the existing circuits can safely carry what is connected to them.
Not always. A panel can be replaced with a new unit of the same service rating when the enclosure or the breakers are failing but the service size is adequate. A service upgrade changes the rating itself, usually from 100 amps to 200 amps, and involves the utility and the service entrance conductors as well.
Yes. Well pumps and irrigation controls need a dedicated circuit sized to the load the equipment actually draws, with proper grounding and a breaker matched to the wire gauge. We handle the circuit from the panel out to the pump or controller, and we check the panel capacity before the circuit is added. If the existing service needs room, that gets scoped as part of the same call.
Whatever brought you here, whether it is a fault you need traced, a panel that has run out of room, or a rewire on a house that has not been touched in decades, we handle it.
Call Davis Electrical Company at (530) 298-9565 for a quote. We're one phone call from getting your power right.
Electrical work also reaches these towns: Sonoma, Yountville, Napa, St. Helena.
Every electrical job we handle starts with a clear scope and a price you hear before anything is scheduled. Whether the call is about a tripped breaker, a panel that can no longer carry the load, or a new EV charger circuit, we work through the same process: trace the problem, explain what it takes to fix it, and get the work done to code. The table below covers the services we offer in Boyes Hot Springs and across Sonoma County, along with notes on what each one involves and who it fits best.
| Service | What the Job Involves | When You Need It | Things to Know |
|---|---|---|---|
| Electrical Panel and Service UpgradesMost Popular |
| Homes adding EV chargers, major appliances, or solar systems that have outgrown their current service | Panel capacity is the starting point for any large electrical addition. We give a plain answer on repair versus upgrade before any work is scheduled, so you know what you are approving. |
| Ceiling Fan Installation |
| Rooms without existing ceiling boxes or fans being replaced with heavier units | A ceiling fan needs a box rated for the fan's weight, not just a standard light fixture box. We check and replace the box when needed as part of the installation. |
| Electrical Repairs and Troubleshooting |
| Any home or business with an active electrical problem | A diagnostic visit traces the fault to its actual source before any parts are replaced. Swapping components without finding the root cause often leaves the underlying problem in place. |
Call (530) 298-9565 to get a price and schedule a visit. We are available every day from 7 AM to 8:30 PM for both urgent calls and planned work.
(530) 298-9565